How to Cut Mens Hair, According to a Barber
Whether you are a stylist apprentice or the perfect apprentice, cutting men’s hair on short hair can make you laugh. Long hair is not like a blunt cut, an intimate crop has hair clippers that mix, mix, and the like with scissors.
As an unlicensed master stylist, I am offering a fee here. Below I’ve put together some tips that I and my colleagues think will help improve your styling. Each method can vary depending on the stylist, but there are some basic principles that all professional (and non-professional) men can use to improve the speed and quality of hair cutting. Good technical skills will help you grow your male clientele.
Wet or dry?
Often times, clipper work is best done on dry hair, especially when blending. It’s hard to see the lines when the hair is wet, and it’s hard to say exactly how the hair will fall out when the hair is cut. However, for most shaving and shaving jobs, your hair should be wet.
Wrong exam
It is important to check this out when cutting hair. It may seem like an unnecessary step to some, but it’s important to make sure the cut is even and proportionate. If you’re cutting a short haircut, check the mirror for mixing and filling (or stand back a few feet). Often times, you will see things from afar that you will miss very much. Also, make sure there is accurate lighting from all angles. The bright light and films make it very difficult to test the quality of the cut.
Anchor pivot point suspended
The first step to good blending is to avoid boundary lines first. In doing the work of the hair clipper, do three steps with each stroke. Start by anchoring the hair clipper by touching the entire flat surface of the blade with your head. Move the clipper up so that it just touches the heel (back) of the blade. Next, hang the clipper freehand as it moves over and out of your hair. This creates the smoothest possible transition.
Mixture: Clipper-over-Comb
One method of mixing between clipper and shear work is the clipper-over-comb method. For this technique, use a detachable blade cutter with a large blade (# 1 1/2 or more). The larger blade makes for a smoother blend as the hair is cut to an even length with the ends of the feathers.
Never use a small blade or a trimmer to mix, as the blades cut the hair in a very smoky manner and delimit a few short lines.
Mix with scissors
Another method of blending is by blending stocks across the board. Cover the hair with a comb and cut the last 1/4 “of the hair with mixed material. Cut the last 1/4” to 1/8 “of hair. Never ever thin the hair around the scalp as this will can lead to very short hair through long hair.Also use scissors with at least 40 teeth to create a scissor line with larger teeth.
Do not use regular scissors to mix as the blades cut the hair very bluntly and mark a lot of small lines.
Mixture: razor
You can also make a mixture with a standard straight razor (without a comb). The hair is pricked with a razor at a 45 degree angle. The angle of the blade is very important because holding the blade in a flatter position will remove too much hair. Holding the blade too tight will damage the fungus. This technique popularized ruffle schools and should not be tried until you have been trained by a hairdresser / stylist experienced in the technique. With razor mixes, the hair must be very damp.
Texturing
A razor (including a watch) or shear point techniques can be used to maintain the haircut structure by cutting the ends of the hair into clear, custom lengths. Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces When pulling the hair between the razor and thumb, hold the razor at an angle and use the Blade movement. The shear point technique is used to add texture to the edges of hair at an angle (or even to alternately cut pieces into pieces). Only carry out these strategies as directed by a qualified instructor.
Finished
Many stylists will spend a lot of time making sure that a haircut blends well and evenly, but the finish is cramped. A good haircut can be completely destroyed with a good finish (a good haircut can also be made respectable with a good finish). It’s important to make sure that all of the lines (arcs and cutouts around the ears) are clean and tidy. Stand in front of the customer while making sideburns and look them straight in the face to ensure parity. Also, check that the bangs are straight.
Cutouts: Blocked or Tapered?
Many stylists and friends use shortcuts to block the client’s hairline. Often times this can be a disaster for the customer. With a blocked haircut, the hair on the back of the neck grows under the block and there is a line between the hair on the back of the client’s head. A shaved haircut goes hand in hand with hair growth. Blocking can give more balance to a leaner neck, so it’s often a good option. When blocking, the hair on the neck should be blocked as little as possible so that there is less hair at the bottom of the line as the cut grows.
What is a blocked cutout?
The blocked neckline is created by shaving a hard line in the natural hairline of the neck. When done correctly, a blocked section follows the natural hairline as closely as possible.
Clipper guards
Many in the industry are strongly against the use of clipper guards. The main argument against the guards is that anyone can jump on the guard and cut their hair. So the feeling is that a lot of customers will try to cut their own hair. However, the fact is that most clients cannot get professional looking results at home. Haircut trainers can only do the finishing, mixing, and tapping necessary to make the clipper cut look professional.
- As a strategy, there are a few things to consider if you decide to use guards.
- When using hair clippers with guards, follow the anchor pivot suspend technique and cut as opposed to the growth pattern.
- Avoid cutting at any angle as this will create small lines as the guard will separate the hair before feeding the blades.
- Go over each part of the hair a few times to make sure that all of the hair is cut.
- Avoid pressing the hair onto a comb or blades that have been cut with your hands as this will create a restriction.
- Always comb your hair before each stroke, but make sure the comb is out before the clipper goes through it.
- Avoid guards that leave hair no longer than 1 cm. The clippers only cut hair effectively when the hair is tensioned enough to apply pressure to the cut blades. Large protectors don’t release enough tension and therefore leave most of the hair behind
How to Cut Men’s Hair at Home Without Messing Up, According to a Stylist
After the salons have closed for a few weeks now, most of us can use the primer. (I’ve already removed my deep manicure and bought a cover-up spray to cover my roots.) If your hair is short, a cut is likely high on your to-do list misrepresented)) To help you (or a partner) fix this, we reached out to Kate Bryan, a professional hairdresser in Raleigh, North Carolina who also runs The Small Things Blog, where she regularly has haircuts . Publish tutorials on makeup and skin care. While this may sound scary, Brian says anyone can learn how to properly cut men’s hair. Follow the step-by-step guide to get everything right.
You need a haircut
Before the previous one. You need adequate supplies. (And no, your styling scissors, kitchen knife or garden goggles are not included.)) Brian makes good hair glasses. You will also need a few different protective size clippers, e.g. B. the full-size Kanair Barbar Shop. Another must-have is a comb. Ideally, Brian goes on to say that you should get a cape of hair to avoid making big noise.
How to cut men’s hair
Now is the time to put your skills to the test. “The haircut I do for my son and husband is a classic men’s haircut,” said Brian. “I use a clipper on everything from the bottom of the temples and mix up the length of the scissors cut at the top.” Start dry or wet hair in your hair salon. Brian says you should sit at home and start with dry hair. “Dry haircuts are easier because you can see the actual length of the hair. Wet haircuts shrink a little compared to dry hair, ”he explains.
Step 1: use your clipper
To start, take your clipper and run it over the nape of the neck and the nape of the neck. “Usually a 3 or 4 watch is a good length and you can always be short if you have to,” says Brian. “Make sure the clipper is cut vertically, diagonally and horizontally over the hair under the temples.”
Step 2: cut with your scissors
Next, take your scissors and pull the hair from the roots to the top of the head and cut the edges. Notice Brian, “Always pull your hair straight around you rather than at an angle to make sure the cut is all around you.” Cut out a section, then add a little more hair and use your first cut as a guide to get it all out. Keep doing this until you like the way the hair looks on your temples and above your head, says Brian.
Step 3: flatten it
To finish, you need to mix them all together. “Hold the comb in front of your head, pull the hair lightly, and cut the invisible hair into steps, which is longer than the hair with a clipper.” ”
Brian said if this is your first time trying to get a haircut, slow it down and cut it off a little at a time. Suggests. You can use these tools and tips to make a successful cut.
How to Cut Your Own Hair Short in 9 Steps: The Complete Illustrated Guide
Hairdressing trips can be so complicated. Not to mention expensive! Especially people with short hair, regular cuts really add up. No wonder so many men just cut their own hair at home.
Are you ready to join them?
People who get great results every time they sit down to cut their hair do one thing:
You follow a tried and tested roadmap. Of course, you can find this out along the way … but are you really ready to take the risk? The following epic guide has already helped thousands learn how to trim their own hair at home. It’s perfectly illustrated and gives you the right amount of information to avoid common problems.
Get Tools
For your short hair, you will definitely need a hair clipper, hair scissors and a hand mirror. Any hair product such as a haircut cap, hair loss scissors and gel is alchemical but helpful.
Let’s start with the guide:
1. Choose a haircut
How do people choose the right haircut for themselves?
The answer is simple:
The shape of the face.
If it’s your first time here don’t make it difficult for yourself – choose something simple.
We have prepared for you a great collection of the most popular clipper cuts that you can easily make at home. They come with accurate clipper protection sizes and easy-to-use diagrams, and of course, they’re completely free. See them here:
Always start with a longer watch than necessary – you can always cut short, but no longer. To protect yourself from disaster, it is a good idea to choose a “backup” haircut if your first choice doesn’t go according to plan.
2. Prepare your workplace
First, wash your hair as you normally would with a shampoo and conditioner. Clean hair is easier to work with, and your tools don’t usually paint than deadly, dirty hair. Towel dry your hair and comb it if you need to remove tangles.
Find a place that is easy to clean. I recommend the bathroom, but your garden can work too. Have your vacuum cleaner ready so you don’t mumble at home and get covered in stray hair.
Prepare what you need. Familiarize yourself with your hair clippers before touching your hair. Turn them on and off, change the speed, turn the clip guards on and off, change blades, etc.
So how can you trim your hair? Most men have a slow taper of short hair on the cut side and short and long hair on the back. Let’s look at the aspects first.
3. Cut the sides
Squeeze the selected size of the guards in your clipper. Section your hair from the bottom to the bottom against the direction of your hair growth and move the clipper up. Pass a few to make sure you have all of the hair.
Shorten your cut a bit by following our instructions. We’re going to mix after two lengths to create a fade. This little technique will make your haircut look a lot more professional.
4. How to Part the Back of Your Hair
Then move the back of your head. Use the hand mirror to see what you are doing and work slowly and steadily. Section the hair by moving it to the top of the hair clipper. As before, shorten the lower part a little.
Make sure the cut is even and well secured on the sides.
Then use the top rocking motion to blend the transition from the side to the long top of the haircut.
6. How to fade away
Fade is only done on very short hair or haircuts. First, follow the tips above, but make the opposite between the length of the top and the bottom. This will create a visible line between the two.
The position of the line determines the type of transition (low, high, medium). The line around your head should be symmetrical and smooth.
To create discoloration, you can speed up this visible line and make it disappear. The more you want the line to be visible, the more careful you need to be to get it right.
You’ll need to use one (or more) hair clippers in between the two to blend the two lengths of hair and create a fade. Gently pull the clipper over the line separating the two separated lengths in an upward motion. Don’t go too far as it could completely screw everything up!
7. How do I cut the top
Haircuts that are a few inches above the top must be cut with scissors. Divide the hair into sections and cut each one in a straight line. A great way to ensure that the hair is the same length with each snip as it was the previous one.
If your hair is more than 2 inches on top, check out our guide to long haircuts for personal advice:
Well done! Inhale and examine your hair. Are there any irregularities? Does the haircut look the same and symmetrical? Hair loss scissors are helpful in this step to hide mistakes.
8. Clean the hairline with a hair clipper
The final step is to cleanse the lines and facial hair, if any. Use a hair clipper or hair clipper and hold it up like a pencil. Gently twist the hairline to clean. Be careful not to go too far around your ears.
The neck can be styled in a number of different ways. If you want to “block” it (that is, draw a horizontal line at the end of the hair), slide your clippers side by side using a guide. Some people use a simple leather belt for this, but you can get such a special plastic guide here.
9. Style your hair
After washing and drying your hair, take another look at your work. This is the time to solve small problems and store the hair products the way you want.
Additional tips
Tip: Usually, a barber cuts the side of your hair, pulls back, and ends in the opposite direction. I suggest not cutting your hair. Instead, you should cut on one side and then continue on the other. This makes for more symmetrical cuts.
Tip: The opposite side of your hair growth should always be cut. It varies from person to person, as well as different parts of the head – run your hands through your hair and look for the direction in which you feel the strongest counterforce.
Conclusion
Congratulations! You just learned a useful new skill. There are many people all over the world who have their hair cut short for various reasons. As you can see, they are incredibly easy to join!
If you have year-round haircut or touch your haircut to extend its lifespan, these tips will save you a ton of money.
