How To Curl Your Hair

A. How To Curl Your Hair – 6 Different Ways To Do It

There are many hair tutorials out there that show you how to curl your hair. That’s why we made a video and put together step-by-step photos showing six different ways to curl your hair with a flat iron and how to curl your hair with a flat iron.

At the end of this tutorial, you will understand how to create different types of curls – spiral curls, barrel curls and everything in between.

1. How to curl your hair with a styler

These first four curling techniques are designed to show you how to use the curler to create different types of curls. We will show you how to create loose curls by curling your hair in the iron cylinder and changing direction. Wrap the curls by wrapping the hair around the cylinder in a flat motion or twisting the hair before wrapping it in the cylinder. Next, we’ll teach you an elegant wave combining two of these four techniques. Here we go…

a. Straighten your hair with a styler

Our preferred modeling tool for this technique is a 1 inch curling iron. Remember to use a heat protection spray before using the curling iron!

This flat wound technique creates a wide wave with plenty of volume. The end result is similar to, but the firmness of the curl depends on the width and thickness of its sections.

For this technique, we recommend using wider sections – about 1½ ”- 2”. The secret of this curly is to roll straight hair against the curler without twisting it. To keep your hair straight against the curler, adjust your hands whenever you turn the curler. Otherwise, the hair will naturally want to twist in the barrel. If you have thin hair and want more volume, this type of curl is for you! Scroll down to see how this is done.

Bonsai Trees
  1. Make a vertical cut and spray your hair with thermal spray to protect it from the heat. Then use a wide tooth comb to distribute the product evenly. Choose the direction in which you want the hair to be wavy, towards your face or away from it.
  2. Concentrate on keeping the section flat when wrapping it in the curler. Remember not to twist your hair in the iron.
  3. Continue to wrap your hair around the iron until you reach the ends. To create more natural curls, do not wrap the last 5 centimeters.

Tip: Getting smaller sections will create a tighter wave pattern and larger sections will create a looser wave pattern. Experiment with the size of your sections until you find the perfect wave size for you!

b. Lazy curls with curler

Using its 1-inch curling iron, this technique creates a loose wave. Take the iron and wrap your hair around the iron, but only halfway. Then, reverse the winding direction for the rest of the section. By changing the direction of the wave and leaving the tips out, the effect of a more relaxed wave is achieved.

  1. Start with your first section and spray a thermal spray at least 6 inches away to protect your hair. Gather the section, using your thumb and forefinger, raise it 90 degrees.
  2. Place the curling iron in front of the section with the iron cylinder behind the section. Holding the lock with the thumbnail facing upwards, wrap it tightly in the iron (do not twist the hair in the cylinder if you are making a flat bandage). Holding the section in place, roll up the iron and close it close to the scalp. Allow the section to warm up completely before continuing.
  3. While holding the lock, remove the cylinder from the hair and turn so that the cylinder is not in front of the section. Place the iron where your last curl was made and repeat, roll, roll the iron and close.
  4. At the end of the section, use your hand and finger to comb the section to separate the curls.

The end result is a lazy wave that looks very natural. Finish with a flexible fixing hair spray.

Tip: Check the temperature by running your finger over the hair of the iron. When your fingers are warm, release the section.

c. Spiral curls with a curling iron

When you take your 1 inch curling iron and heat shield, we will create a spiral spiral. For smaller sections, such as straight curly, the hair is twisted from top to bottom first and then rolled in the curler to create this spiral effect. The end result is a tight spiral with added texture.

  1. First, take a small section and spray a thermal spray at least 6 inches away to protect your hair. Twist the entire section from the base to the ends. Instead of twisting, you can also braid the section of hair.
  2. The key here is to twist the section and roll it in the modeler in the same direction. When you want to curl away from the face, rotate and curl it out of the face.
  3. Wrap all the twisted part around your modeler and let it warm up.
  4. Remove the curling iron and let it cool. Once your whole head is curled, shake the curls with your fingers to loosen them and add more volume.

Tip: Really let your spiral curls boil! The spiral curls collapse because they have not received enough heat or have not cooled long enough to define the style!

d. Waves on the red carpet with a curling iron

A magic wand or a curling iron can be used for this technique. Start with the flat curl technique, but as you wrap your hair around the iron, twist the section as you did with the spiral curl technique. This curling iron technique is more difficult, but the end result is a soft, but very dramatically beautiful wave.

  1. Start with your first section and spray a thermal spray at least 6 inches away to protect your hair. Gather the section, using your thumb and forefinger, raise it 90 degrees and directly in the corner of your eye. Place the curling iron in front of the section with the iron cylinder behind the section.
  2. (Make sure to always keep the hair close to the cylinder on your fingers). Holding the lock in place, with the nail facing up, twist the hair so that the nail is facing the floor. Slide down and wrap it up. Slide the hair down into the barrel, making sure the thumbnail is close to the barrel without closing the blade. (Closing the barrel blades creates lines of demarcation within the crest.)
  3. Repeat the movements until the end of the section: wrap, rotate – thumb up, thumb down, wrap, rotate, thumb up, thumb down, wrap…. At the end of the section, release the elbow of the arm holding the modeler and hold the section in place. While holding the end of the section with the nail in place, rotate the curling iron in the opposite direction to obtain more tension so that the heat can do its job. (This creates tension in the twists – the twist is the crest and the flat envelope is the valley).
  4. Release your thumb and place your palm under the curler cylinder. Hold the hair with your palm as you release it from the barrel. (If the hair falls out without holding, the strand will stretch and become loose). With the section in the palm of your hand, spray two doses of a firmly held hair spray. Make a pancake and squeeze the strand with both palms (the hair is very hot!). Let your hair cool and be patient. Remove the palm section of your hand.
  5. Take your Sam Villa style brush and comb the section to the end. While doing this, hold your hair loose for a few seconds to relax the waves.
  6. Release the section and your loose waves will appear. Add a little light oil whey to tame the frizz. For extra shine, we recommend using Redken diamond oil.

2. How to curl your hair with an iron

In the next two techniques, we will present two different methods for curling hair with a flat iron. The ribbon curly is a flat, tight curly that is created from tension and just a little twist at the beginning. The explosion creates a loose and organic finish creating an S shape with the hair and just hitting the strand with the iron.

a. Ribbon bow with an iron

When you use the iron again, the curl will be a compact curl with more heels and will look like a curl made with the curl. Place the iron in the section diagonally. When closing the iron, slowly turn half a turn and slide the iron over the lock of hair. The half turn and the tension create the wrinkling of the tight band. The wave of the ribbon lasts for days and gradually turns into a wave of beach over the days.

  1. Take a medium-sized section 1 “long by ½” wide and prepare it with a thermal spray. Hold the section in one hand and the iron in the other, with the iron upright and the palm facing the head.
  2. Squeeze the section on the base while squeezing and bending your hand so that the palm is facing you (still holding the section with your left hand). Slowly push the iron to the end of the hair shaft and release the hair. This allows the hair to grow in curls.
  3. Shake the curls with your hands and finish with a flexible fixing spray to keep them in place.
  4. Take your Sam Villa style brush and comb the section to the end. While doing this, hold your hair loose for a few seconds to relax the waves.
  5. Release the section and your loose waves will appear. Add a little light oil whey to tame the frizz. For extra shine, we recommend using Redken diamond oil.

b. Pressing waves with an iron (also called an S wave)

For this curling technique, we will switch to our flat iron. The shear wave is a type of organic finish. By creating a type S figure with your hair and hitting the waves with the iron, the so-called shock wave is created.

  1. Make horizontal cuts with your iron and spray a heat shield first.
    Starting near the scalp, pinch the section with your index finger and thumb.
  2. Insert the iron over the tweezers and start hitting the lock, pressing the hair in the same direction until the lock is fully heated.
  3. Move your “tweezers” down and tap, tap, tap the section again. This time, pull the hair in the opposite direction, as in the previous section.
  4. Focus on making an S pattern.
  5. Repeat this pushing and pulling movement until you reach the ends of the hair.
  6. The end result is beautiful! Loose, organic waves with a different texture than a curling iron

Remember to work in small sections and, like anything you want to be great at … practice is necessary! Don’t rush with these modeling and straightening techniques, take the time to learn them before trying on your own.

 

B. How to Curl Your Hair: 7 Tips That’ll Make Things So Much Easier

Even with all the tutorials and products developed to help you achieve perfect waves on the beach, let’s face it, learning how to curl your hair is still difficult. Regardless of the type of iron you use, there is some kind of learning curve that will help you figure out how to hold the cylinder correctly, what temperature it is set to and how long to keep your hair in it – and that presupposes that you do I have one of the best curling irons to start.

Here’s your quick but effective summary of your best curling tips and all the red flags you should know – all tailored to your hair type and the look you’re looking for. Here’s how to curl your hair once and for all.

1. Make sure you use the correct pipe size

People usually think that the bigger the babyliss, the more beachy the waves are. It is not. “If the iron is too big for the length of your hair, it is very difficult to use,” says Stone. You can always slide the curls tighter to relax them. So, if you have short or medium hair, opt for a 1 inch diameter cylinder. If you have long hair or want looser curls, choose a 1 ¼ inch barrel.

2. Apply hair spray before curling your hair

If you apply the hairspray only when you finish curling, there is an increased risk of your hair falling out. “Spray your hair with a light spray to hold tight, like Aveda Air Spray or Control Force to prepare and also while you fix your curls,” says Stone. “This is especially important if your hair is resistant to curls.”

Just note that you want to make sure your hair is fogged up – not saturating it. Use it a lot and it will put an end to the dreaded smell of burning hair. Also, avoid hair oil, says Stone, as it can weigh in the waves.

3. Adjust the heat setting to suit your hair type

You may be tempted to increase your iron’s heating level as much as possible – it will hold up better, right? Although a higher temperature makes hair faster, it can also damage it if it is thin, dyed or dry. “After processing your hair, keep the heat a little lower, but if you have healthy hair, feel free to increase it,” says Stone. Regardless of your hair type, however, be careful: use a heat shield to prevent permanent damage.

4. Use a different winding technique depending on the type of curl you want

This may seem obvious, but different types of curls and curls require you to wrap your hair around the cylinder differently. “If you want a glamorous lock from the old guard, you want all the hair around the barrel,” says Stone. “If you want modern, messier waves, skip the ends and start lower in your head.”

It is also here that an iron with a clip can be useful (to hold the ends in place), while an iron bar helps to keep the ends loose and open. (For more information on messy waves, check out our guide here.)

5. Pay attention to the angle at which you hold the iron when curling

“If you want more volume, first heat the hair root and hold the iron perpendicular to the lock – that is, at a right angle – that you are rolling,” says Stone. It must come out of your head, not wanting volume; instead, hold the iron straight down. “If you prefer big, bouncy curls or a classic, expansive look, you might want that extra volume. Praia beckons your mood more? Hold your wand up.

6. Do not hold the iron in your hair for more than 10 seconds.

Pierce your brain: you must hold an iron in your hair for a maximum of eight to 10 seconds. “You can keep it a little longer if your hair is resistant to curls or if you want a firmer wave,” says Stone. And make sure you hold each bunch for a constant period of time, the time or the start before the iron is hot enough will affect the result, ”he adds.

7. Dry your hair completely before curling it

Have you ever ironed your hair and heard it start to sizzle? This is not good. This happens when your hair is still a little damp. “Starting with a good hairbrush takes time, but this way it gives salon results,” says Stone. “Prepare your hair with a heat shield and hold the product before drying, then spray hair spray before starting to curl. “Not only does it prevent your hair from frying, but it also helps define curls better.

You may also like...